Drive-Line Upgrades
Dual Friction Performance, with light pedal pressure. The patented Centerforce Duel Friction clutch system delivers 90% more holding power than OEM with light pedal operation. Designed to handle high horsepower and high torque output in street, off-road, light truck and heavy duty commercial applications. For domestic or import, Centerforce fills your clutch system need.
Cyclone Series Stage 1
These units provide increased holding capacity for minor torque increases (i.e.)
aftermarket bolt on accessories to include a 50 shot nitrous oxide injection (NOI).
"OOC" clutches have a performance cover assembly with a stock disk assembly.
"HD00" clutches are designed to provide extended life and superior holding power
for cars with moderate power-adders and for a more enthusiastic driver.
Cyclone Series Stage 2
Preferred by most enthusiasts due to long life and smooth engagement. 100% Kevlar
composite disc provides incredible durability. For moderate torque increases, (i.e.)
aftermarket bolt on accessories, forced induction, 50 shot NOI
Cyclone Series Stage 3
Designed with the above average enthusiast in mind. These units will hold moderate to
heavy torque increases, (i.e.) minor motor works, forced induction, 100 Shot NOI, and
still deliver acceptable driveability. "HDC" clutches use a metallic friction
material on one side of the disk and an organic material on the other for quick
engagement. Metallic disks offer greater performance but have shorter life expectancy.
"HDTZ" clutches are the newest and most popular of the Cylcone line with a
holding power better than the HDC units and a life expectancy of the Stage 2 HDKV
Cyclone Series Stage 4
Designed for the serious enthusiast with high horsepower and torque requirements (i.e.)
major motor works, big forced induction, Big NOI shot. These units will hold the power
with minor decrease in driveability. "HDCB" clutches are moderately civilized
with a sprung hub. Expect minor chatter at low rpms but immediate engagement when power is
applied.
5619 Tilghman Street
Allentown, PA 18104
Phone (800) 334-6074
FAX (610) 391-0625
E-mail info@autoaddictions.com
WWW http://www.autoaddictions.com
Auto Addictions sells may different items for the Probe, as well as for other imports. Check them out. They had the absolute best prices for the Brembo/Eurorotor rotors.
Raybestos Professional Grade
Semi-Metallic Pads - About $35 per end
These pads come with a life time warranty and provide greater stopping power than OEM
pads. They can be found at most auto parts suppliers.
Repco Metal Masters Metallic Pads. - $110
for a full set (front & back)
Provide greater stopping power than OEM pads.
Carbon Kevlar brake pads.
Front Set - Part Number AP583
Rear Set - Part Number AP584
Their specialty is brake pads. They make
their own Carbon Kevlar pads in three compounds:
R4 for Race applications
R4-S for High Performance Street/Limited Competition/Auto-X
R4-E for Endurance Racing
Also carry Redline lubricants, Motul Brake Fluid, Tilton brake parts, and Keith Black adaptors/plumbing parts. They also carry Performance Friction pads and Koni parts and recently added Hawk Brake Pads.
Brake Pads
Axxis Metal Master (formerly Repco brand)
Proven high performance stopping power with excellent pedal feel, virtually no fade, and
improved cold effectiveness. Extended pad life.
Front - $54.95
Rear - $49.95
KVR Carbon Fiber
High performance Carbon Fiber semi-metallic pads that combine the best of both worlds:
Great stopping power and rotor friendliness. They are fade-free and produce no noise and
virtually no dust. Use them for around town or around the track.
Front - $59.95
Rear - $54.95
Hawk HPS Pads
Extremely low dust, rotor friendly, high friction, quiet running. Excellent OEM
replacements for improved braking. Optimal temperature range: Ambient to 700F. For Street
and Autocross.
Front - $62.95
Rear - $49.95
Brake Rotors
Premium Rotors
Front - $69.00
Rear - $69.00
Cross-Drilled Rotors
Front - $88.50
Rear - $88.50
Gas Slotted Rotors
Front - $103.50
Rear - $103.50
Stainless Steel Brake Line Sets
Eliminate spongy pedal feel from swelling of rubber lines under hard braking. Allow for
better pedal modulation. Kits come with front and rear line sets.
Stainless Steel Brake Line Kit - $144.95
Rotor/Pad Combinations
Non-Drilled Rotors with Semi Metallic Pads. Economical way to step up competition-grade
braking
High Grade Front Set - Start @ $164.95
High Grade Rear Set - Start @ $161.95
Cross-Drilled Rotors with Semi Metallic
Pads.
Brembo Front Set - Starts @ $217.50
Eurorotor Rear Set - Starts @ $202.50
Brake Kits
Scott Premium Brake Kit - Start @ $589.00
Includes 2 cross-drilled or gas slotted front rotors, 2 cross-drilled or gas slotted rear
rotors, semi-mettallic brake pads front & rear, and a complete stainless steel braided
brake line kit front & rear with AGIP DOT 4 brake fluid.
AP Racing Brake Kit (front only) -
$2,350.00
Includes 4-piston racing calipers, cross-drilled or gas-slotted 13" disks, high
performance pads, steel braided brake lines, mounting brackets and hardware and DOT 4
brake fluid. NOTE: 17" wheels required to clear these large diameter disks.
Cross Drilled Rotors
Front set - $239.00
Rear set - $202.00
Metal master Pads
Front set - $69.95
Rear set - $59.95
SMC Stainless Steel Braided Brake Lines - $189.95
Piston heads and connecting rods.
Ross Pistons - $125 each.
Carillo Rods - $250 each.
RPS also has custom headers, 3-stage Nitrous Oxide, Accel DFI engine control system, and complete cylinder head porting.
Headers - Part Number HS-2004 - $450 per pair.
These headers offer a 15-20 HP improvement over stock.
For a better price contact CB Performance. He can sell these for $350 +shipping.
Headers - Part Number 70-1161 - $249.95 per pair.
Manufactured using thick steel flanges
and mandrel-bent mild steel tubing, this header, which also fits the Ford Probe 2.5L V6 of
the same years, was carefully designed to minimize installation problems while retaining
the advantages of a tubular header system. Assigned part number 70-1161, the header comes
with upgraded flanges, gaskets, installation fasteners, and all smog and engine management
sensor fittings.
PaceSetter designers were very careful to route the primary header tubes so that the
desired swirl pattern is created in the pre-formed collector. This design feature insures
maximum cylinder scavenging at the tuned rpm, increased engine efficiency at low- and
mid-range rpm's and better high-rpm power output will be the result.
This header is available with black painted or the NEW Armor*Coat metallic-ceramic finish.
Stainless Steel Exhaust System.
Entire system (including headers) is guaranteed for a 10% gain in power and 10 years.
Borla All Stainless Steel Exhaust. Cat-back - Part Number 14429
BORLA's intercooled exhaust tips, which come standard on their systems.
Why Stainless Steel?
Millions of exhaust systems are replaced every year due to corrosion and poor performance.
Automotive exhaust gases are a mix of carbon monoxide, oxides of nitrogen, unburned
hydrocarbons and moisture. These gases condensate and attack the system internally.
Elements such as corrosive salts, moisture and mud contribute to exterior deterioration.
Combine these elements with equipment vibration, high temperatures, emission control
requirements, uneven road surfaces, varying traffic patterns and it is easy to understand
the need and demand for long-lasting exhaust system. BORLA exhausts are built to withstand
these destructive conditions.
Solid T-304 Stainless Steel
BORLA exhaust systems are built of 100% T-304 Aircraft-Quality Stainless Steel, not mild
steel, not aluminum, not coated aluminizing. Coating techniques, such as aluminizing can
prolong the life of mild steel, but coatings suffer at the weld points. Comparing
aluminized steel to T-304 stainless is like comparing gold-plated metal to solid gold!
T-304 stainless steel has the highest chromium content, making it the most resistant to
corrosion. T-304 is therefore the most desirable material for a long-lasting exhaust
system.
Performance by Design
BORLA engineers and manufactures T-304 Stainless Steel Mufflers and Cat-back exhaust
systems for more than 300 vehicle models. These exhausts are designed specifically for
each make and model to produce optimal performance, sound, and appearance. BORLA is
unsurpassed in attention to detail, fit, and application accuracy. BORLA has the largest
selection of Cat-back systems anywhere. They are all made in the USA, 50 state legal, and
are backed by a MILLION-MILE WARRANTY.
BORLA's T-304 Stainless Steel Headers are the power-releasing complement to BORLA Mufflers and Cat-back systems. Mandrel-bent tubing with all-weld construction. Increase horsepower and torque when you plant your foot, and improve gas mileage at cruising speeds. Emission legal in all 50 states.
HKS Exhaust System - Part Number LET-F02
HKS exhaust system features stainless steel pipes, and an aluminized muffler. About a 15 horse power increase with HKS's intake upgrade. About 12 horsepower without.
Greddy has a large line of mufflers and exhaust systems in a number of styles. Check out their web page for more details.
Borla All Stainless Steel Cat-back
Exhaust - $429.00
From the leader in stainless steel exhaust technology, this complete cat-back system comes
with a lifetime warranty.
Remus Stainless Rear Section Exhaust Kit
- $449.00
Dual 3 inch oval tail pipe with Euro sound/quality
Greddy Cat-Back Exhaust System - $609.00
From the leader in Japanese performance car parts, these systems have a great sound and
proven performance. 60mm aluminized steel pipes, heavy gauge stainless muffler, and 110mm
stainless tip.
HKS Sport Exhaust - $575.00
Internal baffles ensure on optimal balance between a broad power band and maximum
horsepower. Fully aluminized pipes are 60mm with 106mm (4.2") tips.
PaceSetter Performance Exhaust Headers
HotShot Exhaust Headers
HKS Sport Exhaust - $574.95
60mm pipe with 106mm tips.
Greddy Exhaust - $649.95
60mm pipe with 110mm tip
Headers - $499.00
Greddy Cat-back Exhaust - Part Number 001+0660 - $585.00
Intake Upgrades
There are a number of ways you can improve the intake of your engine. The more air you can get flowing into the engine the better your performance will be. Below are several options that will improve your airflow.
2355 Mira Mar Ave.
Long Beach, CA 90815
Phone (310) 494-8068
FAX (310) 494-1768
WWW http://www.hksusa.com/
HKS Super Mega Flow - Part Number 1504-SPFZ05
HKS Super Mega Flow systems have been engineered to dramatically reduce inlet restrictions posed by today's sealed factory air boxes. The Super Mega Flow represents the ultimate in filtered air flow. A typical performance air cleaner construction is bigger funnel equals better air flow. Both air and water flow follow similar dynamics. In the case of an air inlet design, air flow tends to move toward surface areas which in turn creates more air flow on the surface (edge) rather than in the center (middle). HKS has created a supreme funnel design using this concept. This design creates maximum air flow with the least amount of restriction. The end result is a smooth and even air flow with increased engine response, horsepower and fuel mileage.
19018 Quail Valley Blvd.
Gaithersburg, MD 20879
Phone (301) 990-8783
FAX (301) 990-0242
E-mail sales@spmotorsports.com
WWW http://www.spmotorsports.com
K&N Lifetime Gauze Panel Air Filter - $40.95
AMSOIL Two-stage Lifetime Foam Panel Air Filter - $29.95
K&N Filtercharger Injection Performance Kit - $139.95
HKS Super Powerflow System - $139.95
Lifetime high-flow performance filter system that replaces the stock air box with a custom
unit.
561 Iowa Ave.
PO Box 1329
Riverside CA, 92502
Phone 1-800-858-3333
FAX (909) 684-0716
E-mail KNFilter@aol.com
WWW http://www.knfilters.com
Stock Air Box Filtercharger replacement element - Part Number 33-2049 - $47.19
K&N developed and manufactures the only air filtration system of it's kind...a high-flow, washable filter that's been proven, again, and again to be the finest in the world.
Greased Channel & Sealing Bead
for optional application of K&N air filter grease for an air tight fit.
Special wide molded rubber Sealing Surface for positive contact.
Reinforced Profile retains element, distortion free allowing repeated cleanings
(heavy duty elements only).
Accordion Design element provides five times greater filtering surface over the
element circumference.
Aluminum Screen Mesh & Fabric combination act as a grid to clean and straighten
air, improving air flow.
Special Cotton Fabric retains K&N air filter oil in suspension acting like a
fluid curtain to stop minute dust and dirt particles.
E-mail drlum@autophysics.com
WWW http://www.autophysics.com
AutoPhysics has designed a filtration system similar to the K & N filter. The main difference between the two is that the AutoPhysics setup is geared mainly toward Probe owners who have automatic transmissions. The kit consist of a cone filter and a tube that connects to the front part of the filter. This is supposed to give it a ram air effect and negate any possible power loss due to the hot air from the engine.
AutoPhysics air filters provide the maximum air flow for your high performance car or truck. More air means more power. Don't let clogged paper filters or sealed top air filters rob your high performance engine of torque and horsepower! Scroll all the way down to see how!
Features:
5619 Tilghman Street
Allentown, PA 18104
Phone (800) 334-6074
FAX (610) 391-0625
E-mail info@autoaddictions.com
WWW http://www.autoaddictions.com
Auto Addictions sells may different items for the Probe, as well as for other imports. Check them out. They had the absolute best prices for the Brembo/Eurorotor rotors.
Turbos
The kits require a $500 down payment. All
orders are shipped UPS/COD. Cash or money orders only. No credit cards. Orders take
approximately 3-4 weeks for delivery. The turbo has a lifetime warranty but only for the
original owner and only if ATS' install guidelines are followed.
Prices start at $2500
Includes:
T3/TO4 Hybrid Custom Turbo
Air-to-Air Intercooler (Stage II & III only!)
Mandrel-Bent Exhaust Pipes
Blow-Off Valve
Custom-Built Fuel Management Unit
Conical Air Filter
Boost Gauge
Installation is mainly bolt-on, but you are required to have the oil fittings for the turbo welded onto your oil pan and the exhaust for the turbo welded into your exhaust system. Also the turbo sits were the battery is, and the intercooler mounts under that. So you'll have to mount the battery someplace else (the hatch).
Wheels & Tires
5619 Tilghman Street
Allentown, PA 18104
Phone (800) 334-6074
FAX (610) 391-0625
E-mail info@autoaddictions.com
WWW http://www.autoaddictions.com
Auto Addictions sells may different items for the Probe, as well as for other imports. Check them out. They had the absolute best prices for the Brembo/Eurorotor rotors.
487 West John Street
Hicksville, NY 11801
Phone (800) 645-3878
FAX (516) 822-5703
E-mail cyberkonig@aol.com
WWW http://www.konigwheels.com
25954 Commerce Center Drive
Lake Forest, CA 92630
Phone (800) 631-7058
FAX (714) 435-1568
E-mail sales@tswnet.com
WWW http://www.tswnet.com
11215 Young River Ave.
Fountain Valley, CA 92708
Phone (714) 549-9800
FAX (714) 549-9898
E-mail info@axiswheels.com
WWW http://www.axiswheels.com
771 W. Chippewa Avenue
South Bend, IN 46614
Phone (800) 428-8355
FAX (219) 236-7707
WWW http://www.tirerack.com/
7333 E Helm Dr., Suite #7
Scottsdale, AZ 85260
Phone (800) 483-7555, (602) 443-5621
FAX (602) 483-9230
WWW http://www.tires.com/
7455 Reseda Blvd., #B-55
Reseda, CA 91335
Phone (877) 465-TIRE, (818) 832-9393
WWW http://www.onlinetires.com/
This vendor is strictly online business only, but when you call them they can set you up with the tires at very good prices, sometimes up to 50% off MSRP. They then will ship them to either their recommended shops, which is usually Discount Tire Centers/Evans Tires, or they can ship to a tire shop of your choice. They have excellent salespeople who are willing to help at every turn and can get you good prices at ALL times.
They carry popular tires such as:
922 SW 151st
Seattle, WA 98166
Phone (206) 248-1820
FAX (206) 248-1622
E-Mail info@fikse.com
WWW http://www.fikse.com/
Suspension Upgrades
5619 Tilghman Street
Allentown, PA 18104
Phone (800) 334-6074
FAX (610) 391-0625
E-mail info@autoaddictions.com
WWW http://www.autoaddictions.com
Auto Addictions sells may different items for the Probe, as well as for other imports. Check them out. They had the absolute best prices for the Brembo/Eurorotor rotors.
715 13th Street
Lake Park, FL 33403
Phone 1-800-338-7015
FAX (561) 842-6102
E-mail ADDCO-IND@worldnet.att.net
WWW http://www.addcoindustries.com/
Rear anti-sway bar (22mm) - $175. Please read my installation notes on this.
19018 Quail Valley Blvd.
Gaithersburg, MD 20879
Phone (301) 990-8783
FAX (301) 990-0242
E-mail sales@spmotorsports.com
WWW http://www.spmotorsports.com
Reduce body flex and unwanted camber changes during hard cornering for better handling.
103 E. Polk Street
Richardson, TX 75081
Phone 1-800-696-5018
FAX (972) 479-0047
WWW http://homepages.waymark.net/parts/
Suspension Techniques Springs - Part Number 60310 - $205.00
453 Van Houten Ave.
Passaic, NJ 07055
Phone (973) 773-2737
WWW http://www.pro-store.com
Phone 1-800-277-6674
FAX (404) 361-0199
E-mail nopi@nopi.com
WWW http://www.nopi.com
Intrax Springs - $197.63
15542 Graham Street
Huntington Beach, CA 92649
Phone (714) 899-1220
FAX (714) 899-1222
WWW http://www.roadraceengineering.com
E-mail MIKEatRRE@aol.com
1330 Storm Parkway
Dept. MT
Torrance, CA 90501-5041
Phone (310) 534-4934
17817 Gillette Ave.
Irvine, CA 92714
Phone (714) 752-6700
FAX (714) 752-6788
WWW http://www.eibach.com/
Oil & Filters
Amsoil Building
Superior, WI 54880
Phone (715) 392-7101
FAX (715) 392-5225
E-mail
WWW http://www.amsoil.com
Amsoil makes some of, if not the best synthetic motor oil in existence. They were the first to pioneer synthetic fluids and have a list of 'firsts' to their credit. Their oils excel where others fail, allowing them to claim higher intervals between oil changes.
19018 Quail Valley Blvd.
Gaithersburg, MD 20879
Phone (301) 990-8783
FAX (301) 990-0242
E-mail sales@spmotorsports.com
WWW http://www.spmotorsports.com
AMSOIL Replaceable 4-micron Depth Oil Filter - $12.50
6100 Egret Court
Benicia, CA 94510
Phone (707)745-6100
Toll-Free (800)624-7958
Fax (707)745-3214
Email redline@redlineoil.com
WWW http://www.redlineoil.com
Red Line Synthetic Oil Corporation has the most complete line of automotive lubricants available. Red Line realizes that reducing friction is necessary in a rear differential, but that friction is actually necessary in a transmission so that synchronization may occur. No lubricant can do a perfect job for both. The same is true for engines. Reducing friction is a goal of engine lubricants, but the detergents used in most motor oils compete with the friction reducers for the metal surface. So if you want the lowest friction, use an oil formulated for the lowest friction. Red Line manufactures Racing Oils which contain few detergents, so no compromise has to be made
Miscellaneous Items
PRD offers a soon-to-be wide assortment of items for the Probe. Among these items are currently a short-throw shifter, an intake system, and a rear-strut tower brace. In the works are a rear anti-sway bar, a front strut bar, a lower tie bar, an oil filler cap, a cove for the front spark wires, and some gauge holders.
4523 San Fernando Rd. Suite I
Glendale, CA 91204
Phone (818) 545-8218
FAX (818) 545-8651
Bolt-In Roll Cage (street or race) by Autopower.
4521 Van Nuys Blvd.
Sherman Oaks, CA 91403
Phone (800) 225-3498
Phone (In CA only) (818) 986-8881
FAX (818) 986-8882
WWW http://www.nrauto.com/
White Face Gauges - $149.00
19018 Quail Blvd.
Gaithersburg, MD 20879
Phone (301) 990-8783
FAX (301) 990-0242
E-mail sales@spmotorsports.com
WWW http://www.spmotorsports.com
Benevento Sunroof Wind Deflector - $39.50
Colgan Two-piece Bra - $105.00
Glen Wild Road
Glen Wild, NY 12738
Phone 1-800-431-3400
WWW http://www.impactparts.com/ford
Aero kits and wings. Check out their web page.
919 S. Fremont Ave. #318
Alhambra, CA 91803
Phone (818) 458-0814
FAX (818) 458-0814
They carry many styles of wings. Check out their Web page.
847 W. 16th Street
Newport Beach, CA 92663
Phone (714) 722-9995
FAX (714) 722-9997
E-mail info@wingswest.com
WWW http://www.wingswest.com/
They carry many styles of wings and aero kits. Check out their Web page.
158 Roebling Street
Brooklyn, NY 11211
Phone (718) 387-0800
FAX (718) 486-7957
WWW http://www.erebunicorp.com/
They carry many styles of wings and aero kits. Check out their Web page.
Carparts.com - the absolute best in terms of pricing. Availability is good as well, with most parts being shipped within 5 working days.
AutoPartsGiant.com - similar to Carparts.com. Prices here are just as good, if not better for certain items. Very good with shipping, items usually delivered in 3 days or less, if in stock.
Scooter's Auto - now you can find prices cheaper across the net, but they WILL have what you're looking for.
Roebuck Mazda - another great parts source, always having good prices, and definitely having the parts you need.
Robocar Motorsports - located in City of Industry. Contact Shawn, who has an interest in our cars and can give you a good deal.